carbon gravel bike fork RGT Fork – Seido Bicycle Components

carbon gravel bike fork RGT Fork – Seido Bicycle ComponentsOur RGT fork delivers an upgrade pack to any contemporary all road gravel bike with matching geometry. It boasts tire clearance up to 47 622 or 54 584, accepts brake rotors up to 180 mm and is ready to work with frames that route cables fully internally. Triple cage mounts on each fork leg help carry more gear along, all while being lightweight and stiff thanks to an advanced carbon fiber construction. The utilitarian nature of the RGT is emphasised

Our RGT fork delivers an upgrade pack to any contemporary all-road / gravel bike with matching geometry. It boasts tire clearance up to 47-622 or 54-584, accepts brake rotors up to 180 mm and is ready to work with frames that route cables fully internally. Triple cage mounts on each fork leg help carry more gear along, all while being lightweight and stiff thanks to an advanced carbon fiber construction.

The utilitarian nature of the RGT is emphasised by its compatibility with internal dynamo cable routing. This makes for a neat and practical package and lends itself well to use on different types of bikes - the fast tourer, the gravel road explorer, or the four season commuter.

You can load up the RGT fork with a total of 9kg - the triple cage mounts will carry a total of 4.5kg when used together. You can gear it up to be ready for the impromptu overnighter or short trip, or attach your provisions for a day's work.

In 2023, Off-Road.cc tested out our RGT fork and had some great feedback:
"Seido has done a great job at making the RGT a viable option for many. It adds comfort and compliance to any setup, and with the cage mounts, mudguard mounts and light mounts it also makes a great bikepacking and long-distance fork for carrying more."

COLOUR
Black

MATERIAL
Full UD carbon fiber

STEERER
Tapered , 1-1/8" - 1-1/2", 300 mm length

S.H.I.S. DIMENSIONS
28.6 | 40

OFFSET
50 mm

AXLE TO CROWN
400 mm

HUB SPACING
100 mm

BRAKE
Flat Mount 160, rotor size 160 - 180 mm

INTERNAL ROUTING
Brake hose / dynamo cable

MOUNTS
Triple cage / head light / mudguards

INCLUDED
Through axle, expander, cable port plugs

WEIGHT
510 g (w/o through axle, w/o bolts, uncut steerer)

TIRE CLEARANCE
47 - 622 / 54 - 584

MAXIMUM SYSTEM WEIGHT
130 kg

EXTRA INFO
Two front brake routing options: fully internal brake hose routing (front brake line enters fork through steerer tube port) or semi internal brake hose routing (front brake line enters fork through fork blade port). Steerer tube port can also be used for fully internal hub dynamo cable routing. The minimum distance between fork crown and upper headset bearing is 80 mm.

FORK STEERER INNER DIAMETER
23.6 mm

CROWN DIAMETER
57 mm

ASTM RIDING CONDITION
2

HUB TYPE
12 x 100 mm

TA TOTAL LENGTH (CLOSED)
120 mm

TA DIAMETER
12 mm

TA THREADING DIAMETER X PITCH
M12 x 1.5

MIN. THREAD LENGTH
14 mm

MAX. DIAMETER HUB ENDCAPS
21 mm

NOTE: The RGT fork is NOT approved for rack usage. Only water bottle / triple cage mounts. If you need to use a rack check out our MGV fork. The maximum cage mount load refers to the dynamic load that the mounts are exposed to. Forks with mounted cages must be treated with great care. Leaning the bike with the cage against a wall or onto the ground, or hitting obstacles with the cage will result in a dynamic load that exceeds the maximum load by far. Installed cages need to touch the fork blade surface within a radius of 5 mm around the center of the mounting bolt. Some cages might need to use washers between cage and fork blade.  

SAFETY NOTES

INSTRUCTIONS ENGLISCH

INSTRUCTIONS GERMAN